Indexing capability to easily locate important recordings.
Built-in microphone for recording anytime, anywhere.
Quick review lets you listen to what has just been recorded.
Tape counter for easy location of previously recorded passages.
Battery Life Indicator
3 LED battery-check system for information on how much battery life remains.
Dual tape speeds give you up to three hours of recording time on a 90-minute tape.
External jacks provide easy connection for earphone, microphone and external power.
Cue/Review makes for fast, easy message monitoring.
Variable control voice actuator for hands-free recording.
Built-in, dynamic speaker delivers crystal-clear sound.
| Drive System | Capstan Drive |
| Tracks | 2 tracks, 1 channel monophonic |
| Tape Speed | 2.4 cm/ sec., 1.2 cm/ sec. (switchable) |
| Microphone Sensitivity | Continuous adjustment using volume knob |
| Voice Activation | Continuous adjustment using volume knob in the VCVA recording mode |
| Speaker | 28mm dynamic internal speaker |
| Overall Frequency Response | 400 ~ 4,000Hz at 2.4 cm/ sec. 400 ~ 3,000Hz at 1.2 cm/ sec. |
| MIC Jack | 2.5 mm diameter, impedance 2k (headphones) |
| Earphone Jack | 2.5 mm diameter, impedance 2k |
| Overall Frequency Response | QP
mode: 200 to 7,000 Hz SP mode: 200 to 5,000 Hz |
| Practical Max Output | 150 mW at 2.4 cm/ sec. |
| Continuous Battery Duration Time | Recording time 17 hours (when alkaline manganese dry cell batteries are used by the Olympus testing method) |
| Power Source | Rated voltage 3V DC . |
| Battery | Batteries: two 1.5V "AAA" batteries |
| External Power Supply | A-329 AC Adapter |
| Weight | 4.9 oz. / 140 g (including batteries) |
Pearlcorder J500
Instruction Manual
Wrist Strap
2 x AAA Batteries
1 x XB60 Tape